Beelink EQ13 (N100) as a Whole-Home Server: What Reviews and Owner Reports Show
A dual-LAN mini PC pitched at DNS, proxy and backup duty, judged from published reviews and its spec sheet

Contents
A mini PC becomes infrastructure once it has run for weeks: long enough for a filesystem to fill up unexpectedly, for a fan curve to show itself under real thermal load rather than a synthetic benchmark, and for corners cut to reach the price point to start showing. This article has no first-hand month behind it. It collects what published reviews, the maker’s specification and owner reports say about the Beelink EQ13, and says where those sources disagree. The EQ13 is built around Intel’s N100 (it is also sold with the N200), the four-core Alder Lake-N part that has become the default recommendation for a low-power always-on box. It is specified differently from the generic N100 mini PC: two Ethernet ports instead of the usual one, aimed at people who want a box doing router, NAS front-end and general self-hosting duty rather than sitting behind an existing switch as another endpoint.
What’s actually in the box
The N100 is a 6W base TDP part, four cores and four threads, boosting to 3.4GHz per the maker, built on Intel 7 — the same silicon generation underpinning most of the current wave of budget mini PCs, NUC-alikes and fanless firewall boxes. CNX Software’s launch coverage lists a SO-DIMM memory module (so RAM is user-replaceable), a 500GB M.2 2280 NVMe drive with a second M.2 socket and a 2.5-inch SATA bay, a built-in power supply, Windows 11 Pro preinstalled, and two Ethernet ports. Retail pricing at launch was reported at roughly $250-300 depending on CPU, comfortably under what a low-end NAS chassis costs before drives.
One detail needs care before buying: the networking. The maker’s spec list as reported by CNX labels the ports 2.5GbE, but the most detailed review found, from number13.de (an N200 unit), measured two Realtek RTL8168/8111 gigabit controllers, and reader comments on the launch coverage say the 2.5GbE ports of the older EQ12 were dropped. Memory type is similarly reported as DDR5 in one place and DDR4-3200 in another. Treat the variant on the product page, not the generic description, as the authority, and check the NIC speed if 2.5GbE matters to the plan.
None of that is exotic. What makes it interesting is how it holds up doing a specific job around the clock rather than how it benchmarks in isolation.
Why two Ethernet ports change what this box is for
A single-NIC N100 box is a compute node: plug it into your existing network, run services, done. A dual-NIC box is implicitly being sold as something that sits between two networks — most obviously a router or firewall, but just as usefully as a NAS-and-server combo where one port faces the LAN and the second port is reserved for a dedicated backup or storage network, kept separate from general household traffic without needing a managed switch to enforce that separation.

The second arrangement is the more interesting one: one port on the general home LAN, the second dedicated to a point-to-point link with a NAS for backup jobs, so a large nightly backup does not compete with video streaming or a call on the same wire. The same result is possible with VLANs on a single NIC, and a separate article covers segmenting a home network with VLANs as the more flexible general approach — but a genuinely separate physical NIC removes an entire class of “did I get the VLAN tagging right” troubleshooting, at the cost of a port you can’t repurpose without physically rewiring.
Power draw
The most useful published numbers come from number13.de’s review of an N200 unit, which measured idle at about 10.1W on Windows with the bundled SATA SSD and 11.5W with an NVMe drive. The same review recorded 6.6-8.3W idle on Linux, falling to about 5.2W with powertop auto-tuning and no display attached, and about 25W under a sustained Linux stress test (a HandBrake encode peaked at 32.5W for 40 seconds). The reviewer called Windows idle relatively high for the class. A smartzone.de test reported 7-8W at idle, though its text refers to the sibling EQ12. The pattern across sources is a Linux idle in the mid-single digits to low eight watts, which is what most always-on duty would spend nearly all its time at.
At roughly 25p per kWh (a typical UK unit rate, which varies by tariff), an always-on device averaging 8-10W works out to about £18-24 a year, trivial next to an old tower server or repurposed desktop at idle, and the reason N100 boxes displaced older, more powerful but far less efficient hardware for this role. The fuller version of that comparison, including where a more powerful older box still wins on raw compute, is in the power-bill maths of mini PCs against old servers and a specific refurb OptiPlex against a new N100 box. The EQ13’s published numbers sit where those comparisons would predict for this class of hardware. At the other end of the mini PC range, the Minisforum MS-01 packs dual 10GbE and a PCIe slot into the same kind of chassis.
Thermals and fan noise, the part spec sheets don’t tell you
A 6W TDP means the EQ13 does not need much cooling, and reviewers agree. Number13.de found the N200 unit stayed below 80°C under load, with a lukewarm case and a radial fan it described as inaudible at both low and high load. Team Pandory reports roughly 47°C at idle and about 70°C at maximum use, while smartzone.de saw 70-80°C in stress tests with fan noise around 37 dB(A). Those ranges differ by test method and room, but none approaches a throttling problem for a box that spends most hours idle. Low core counts and modest clocks mean there is little sustained heat for a cooling solution this size to fight, which is also why fanless N100 designs exist for lighter-duty roles.
What it would be running
The typical small self-hosted stack for a box like this is a DNS sinkhole, a reverse proxy terminating TLS for a handful of internal services, a lightweight monitoring agent, and the backup job above syncing to the NAS over the dedicated NIC. None of it individually taxes a four-core chip, but all of it concurrently, plus periodic container image updates, is a fairer picture of “whole home server” than any single benchmark. A minimal example compose file:
| |
Services like these are light by design, and owner reports of N100 boxes in this role generally describe CPU usage well within four cores outside backup windows. That headroom is the practical answer to “is an N100 enough” for this mix of duties: plenty, right up until the workload is genuinely CPU-heavy, such as real-time transcoding for several simultaneous streams. Number13.de’s weak Blender and gaming results and poor energy efficiency under load make the same point from the other side.
First boot and setup friction
Reviews agree the EQ13 ships with a clean Windows 11 Pro installation, which most homelab buyers wipe in favour of a Linux distribution or a hypervisor. That is a USB-installer job, but it is worth knowing going in that a “server” box ships consumer-OS-first. Number13.de also notes that Windows updates can pin the CPU on this class of hardware, another reason to replace it quickly.
BIOS and driver updates are reported as available from Beelink and maintained regularly, so it is sensible to check for one before committing to a final OS install. The settings that matter for this role are boot order, power state after AC loss and the fan curve; on mini PCs generally the AC-loss option defaults to staying off, so confirm it is set to restore power before the first outage rather than after.
Storage: what the drive layout gets you, and where it doesn’t
The primary M.2 2280 slot is PCIe 3.0 x4; the second M.2 socket is reported as PCIe 3.0 x1, limited to roughly 985 MB/s, and there is a SATA bay. Number13.de’s unit shipped with a SATA SSD in the NVMe-capable slot whose write speed fell from about 450 MB/s to 180 MB/s after 150GB and to 80 MB/s after 270GB, so replacing the bundled drive is a reasonable first upgrade. Redundancy is another matter: a mirrored array needs deliberate software setup across those slots, and a single failed drive is otherwise a full restore from backup. For a DNS, reverse proxy and monitoring role that is an acceptable trade, since none of those services hold irreplaceable data.
Keeping bulk storage and redundancy on a separate NAS reached over the second NIC is the sound division of labour, and the honest answer to “why not use this as the NAS too”. A NAS with proper redundancy handles data that cannot be regenerated, and a cheap, low-power compute node handles the services that touch that data. If you are weighing a dedicated NAS chassis against building storage into a box like this one, the trade-offs are laid out in Synology’s DS423 against a DIY N100 storage build. The short version is that this box does not compete with that decision; it talks to whichever answer you land on.
Troubleshooting: what to watch for
Reviews and the general behaviour of dual-NIC hosts point to three things worth checking.
The bundled SSD is the first. Number13.de’s unit shipped with a SATA drive that slows badly as it fills, so disk-bound tasks can feel sluggish until it is replaced with a proper NVMe drive. Check which device the installer targets.
The second is routing on the dedicated backup NIC. Without an explicit static route or a second subnet configured on that interface, an operating system will typically send all outbound traffic through whichever NIC came up first, ignoring the second port for anything except hosts on its own subnet. Assigning the backup NIC its own subnet, distinct from the primary LAN, and pointing the NAS at that address fixes it. The two ports will not load-balance or fail over without extra configuration such as keepalived or bonding, so “two NICs” does not mean “two NICs cooperating” out of the box.
The third is power behaviour. A box that stays off after an outage is a one-time BIOS fix, but one best made before an actual power cut.
| Symptom | Likely cause | Fix |
|---|---|---|
| Disk-bound tasks feel slow | Bundled SATA SSD slows as it fills (reported by number13.de) | Install to a proper NVMe drive |
| Second port ignored | The OS routes outbound traffic through the first NIC that came up | Give the backup NIC its own subnet and point the NAS at it |
| Box stays off after a power cut | Default BIOS power state after AC loss | Change that setting before the first outage |
Is it worth it for this specific role
For a box whose entire job is DNS, a reverse proxy, light monitoring and backup duty over a dedicated link, the published evidence is encouraging: low idle draw, modest temperatures and quiet fans. The second Ethernet port is the differentiator over a cheaper single-NIC N100 box, and it justifies a modest price premium if there is a concrete use for it, such as a dedicated backup path, a small internal-only network segment or router duty. Confirm the port speed for the variant you buy, since sources disagree on whether it is 2.5GbE or gigabit; for backup traffic to a NAS, gigabit is often enough, but a 2.5GbE plan needs verifying. If the workload is a single NIC’s worth of traffic with no plan to separate anything physically, the extra port is dead weight and a cheaper single-NIC N100 box does the same job for less. For anything approaching real transcoding or heavier compute, this is the wrong chip regardless of how many Ethernet ports it has. That workload belongs on a box with a discrete GPU or a more capable CPU.
None of this replaces long-term owner data. Weeks of uptime reports are what show whether a given unit’s fan, firmware and power behaviour hold up, so read recent owner threads for the specific variant before buying. On the evidence available, the EQ13 looks like a quietly reliable box for modest always-on duty.




